{"product_id":"timber-ring-low-profile-ceiling-fan-with-light","title":"Timber Ring Low Profile Ceiling Fan with Light","description":"\u003cp\u003eThe \u003cstrong\u003eTimber Ring Low Profile Ceiling Fan with Light\u003c\/strong\u003e is a 50 cm ring of light timber with five clear blades tucked inside it and a frosted LED ring underneath. Mounted, it reads as a timber ceiling light — the blades all but disappear against the diffuser, and the fan only shows itself once the air starts moving. It sits semi-flush against the ceiling with no drop rod, which is what makes a real ceiling fan possible in rooms where a fan on a rod would hang at head height.\u003c\/p\u003e\n\n\u003cp\u003eThe motor runs in both directions, so the same fitting earns its place all year. Forward in summer, the five blades push air down and that moving air feels cooler without the air conditioner doing all the work. Reversed in winter, they draw air upward instead, pushing the warm air that collects at ceiling level back down the walls — the room evens out, and the still, damp feel of a closed-up winter room goes with it. One button on the remote changes the direction.\u003c\/p\u003e\n\n\u003cp\u003eControl is doubled on purpose. The remote covers the light, the stepless brightness and colour, all six fan speeds, the reverse and a 1 or 2 hour timer — and the fitting also answers the existing wall switch. Both have memory: switched on either way, it comes back exactly as it was last used, the same speed, the same brightness, the same white.\u003c\/p\u003e\n\n\u003ch2\u003eKey features\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e\n\u003cstrong\u003eRemote control included:\u003c\/strong\u003e light on and off, stepless brightness and colour, all six fan speeds, stop, the winter reverse and a 1 or 2 hour timer\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eDual memory, wall switch and remote:\u003c\/strong\u003e the fitting works from the room's existing switch as well as the remote, and either way it comes back at the last settings used\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eReversible motor for summer and winter:\u003c\/strong\u003e forward for a cooling breeze, reversed to push ceiling-level warm air back down and take the damp feel out of a closed winter room\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eFive clear blades hidden inside the ring:\u003c\/strong\u003e no fan silhouette against the ceiling — the blades sit inside the timber ring and vanish against the lit diffuser\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eA solid timber ring, 50 cm across:\u003c\/strong\u003e finger-jointed blocks of light timber around a frosted ring that spreads 4320 lumens over the whole circle instead of one bright point\u003c\/li\u003e\n \u003cli\u003e\n\u003cstrong\u003eSix speeds tuned soft:\u003c\/strong\u003e speeds 1–2 are genuinely low for sleeping, 3–4 suit working or reading, 5–6 cool a room down quickly — and the timer switches the fan off after 1 or 2 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eSizes and options\u003c\/h2\u003e\n\u003cp\u003eOne size and one finish: a 50 cm (19.6 inch) light timber ring with clear blades, controlled by the included remote and the room's wall switch. Sold as a single ceiling fan.\u003c\/p\u003e\n\n\u003ch2\u003eWhere it works best\u003c\/h2\u003e\n\u003cp\u003eThe manufacturer rates it for rooms of about 8 to 20 m². The warm 3000 K end and the 1–2 hour timer make it a bedroom fitting first — including a child's room, where one fitting does the light and the air together. Run cooler, the same fitting suits a study or home office at 6500 K, a kitchen or dining room around 4000 K, and any smaller living room that a full-size fan would overwhelm. The low profile is made for standard 2.4 m ceilings, indoors and in covered, dry areas.\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n \u003ctbody\u003e\n \u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e50 cm (19.6 inch) across the timber ring\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eDepth\u003c\/td\u003e\n\u003ctd\u003eNot stated by the manufacturer. It ships in an 18 cm deep carton and mounts semi-flush, with no drop rod.\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eRing\u003c\/td\u003e\n\u003ctd\u003eLight timber, built from finger-jointed blocks\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eBlades\u003c\/td\u003e\n\u003ctd\u003eFive clear reversible blades, enclosed inside the ring. Blade material not stated by the manufacturer.\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eFan\u003c\/td\u003e\n\u003ctd\u003e52 W, six speeds, reversible — listed at 51–60 W rated power\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eLight\u003c\/td\u003e\n\u003ctd\u003eBuilt-in LED ring, 4320 lumens, stepless from 3000 K warm to 6500 K cool\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eDimming\u003c\/td\u003e\n\u003ctd\u003eStepless, from 5 to 100%, on the remote\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eControl\u003c\/td\u003e\n\u003ctd\u003eRemote control included, plus the room's wall switch — both with memory for the last settings used\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eTimer\u003c\/td\u003e\n\u003ctd\u003e1 or 2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eRoom size\u003c\/td\u003e\n\u003ctd\u003eAbout 8 to 20 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003e85–265 V, suits the Australian 230 V supply\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e3.9 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eCarton\u003c\/td\u003e\n\u003ctd\u003e53 × 53 × 18 cm\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eMounting\u003c\/td\u003e\n\u003ctd\u003eSemi-flush ceiling mount. An \"S\" safety hook is included to hold the fitting from the ceiling plate while it is wired.\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eBulbs\u003c\/td\u003e\n\u003ctd\u003eNone to fit — the LED is built in\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003ctr\u003e\n\u003ctd\u003eAir flow, noise level and IP rating\u003c\/td\u003e\n\u003ctd\u003eNot stated by the manufacturer. For indoor rooms and covered, dry areas.\u003c\/td\u003e\n\u003c\/tr\u003e\n \u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eSold as a single ceiling fan.\u003c\/p\u003e\n\n\u003ch2\u003eWhat's in the box\u003c\/h2\u003e\n\u003cul\u003e\n \u003cli\u003e1 × ceiling fan with the timber ring, clear blades and built-in LED\u003c\/li\u003e\n \u003cli\u003e1 × remote control\u003c\/li\u003e\n \u003cli\u003eCeiling plate and mounting hardware\u003c\/li\u003e\n \u003cli\u003e\"S\" safety hook for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eInstallation\u003c\/h2\u003e\n\u003cp\u003eThe fan is wired into the mains and must be installed by a licensed electrician. The ceiling plate goes up first; the included \"S\" hook then holds the fitting from the plate, leaving both hands free for the wiring, before the fan is lifted into place. \u003cstrong\u003eNever power the motor before the blades and the assembly are complete\u003c\/strong\u003e — the manufacturer warns that running it without load can overheat the motor, and the built-in sensor that stops an unloaded motor is a safeguard, not an invitation to test it bare. If the room's wall switch is used to cut power, leave it on afterwards so the remote keeps control. If the remote ever stops responding, switch the fitting on at the wall and hold the PAIR CODE button within about 5 seconds; the light flashes when the remote is paired again.\u003c\/p\u003e\n\n\u003ch2\u003eCare\u003c\/h2\u003e\n\u003cp\u003eSwitch the fan off at the wall before cleaning. Wipe the timber ring and the diffuser with a dry or barely damp soft cloth — no solvents or abrasive cleaners on the timber. The clear blades sit inside the ring and can be wiped the same way when they gather dust. Check once a year that the mounting screws are still tight.\u003c\/p\u003e\n\n\u003ch2\u003eQuick answers\u003c\/h2\u003e\n\n\u003ch3\u003eWill it fit a 2.4 m ceiling?\u003c\/h3\u003e\n\u003cp\u003eYes — that is the room it is made for. It mounts semi-flush with no drop rod, and while the manufacturer does not state the exact depth, the fitting ships in an 18 cm deep carton, so the blades stay above roughly 2.2 m on a 2.4 m ceiling. That clears the 2.1 m a ceiling fan needs over head height.\u003c\/p\u003e\n\n\u003ch3\u003eWhat size room does it suit?\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer rates it for rooms of about 8 to 20 m² — a bedroom, a child's room, a study, a kitchen or a dining room. In a large open-plan living space it works best over one zone, or as a pair.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the winter mode work?\u003c\/h3\u003e\n\u003cp\u003eOne button on the remote reverses the motor. Forward in summer, the blades push air down and that moving air feels cooler. Reversed in winter, they draw air up, so the warm air that collects at ceiling level is pushed back down the walls — the room evens out without the heating working harder, and moving air takes the damp, closed-up feel out of the room.\u003c\/p\u003e\n\n\u003ch3\u003eCan the light colour be changed, and can it be dimmed?\u003c\/h3\u003e\n\u003cp\u003eBoth, and neither in fixed steps. The colour slides anywhere between 3000 K warm white and 6500 K cool white, and the brightness anywhere between 5 and 100%, all from the remote. At full power the LED ring gives 4320 lumens.\u003c\/p\u003e\n\n\u003ch3\u003eWhat does the dual memory do?\u003c\/h3\u003e\n\u003cp\u003eThe fitting remembers the last speed, brightness and colour used — whether it is switched back on from the remote or from the room's wall switch. A bedside lamp level set at night comes back as the same low, warm light the next night, with no re-setting.\u003c\/p\u003e\n\n\u003ch3\u003eIs it quiet enough for a bedroom?\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer does not publish a decibel figure, so there is no number to quote. What is on record is the design: the listing presents it as a soft, low-noise fan for sleep, the six speeds start genuinely low, and the 1 or 2 hour timer exists precisely so the fan can run while someone falls asleep and switch itself off after.\u003c\/p\u003e\n\n\u003ch3\u003eWhat if the remote stops responding?\u003c\/h3\u003e\n\u003cp\u003eRe-pair it: switch the fitting on at the wall switch and, within about 5 seconds, press and hold the PAIR CODE button on the remote. The light flashes when the code has matched. This is also the first thing to try after a power cut.\u003c\/p\u003e\n\n\u003ch3\u003eCan it be used outside?\u003c\/h3\u003e\n\u003cp\u003eThe manufacturer does not state an IP rating, so it is for indoor rooms and for covered, dry areas such as a roofed alfresco. It should not be exposed to rain or sea spray.\u003c\/p\u003e\n\n\u003ch3\u003eDoes it need an electrician?\u003c\/h3\u003e\n\u003cp\u003eYes. It is a hardwired ceiling fan on a wide 85–265 V input, which suits the Australian 230 V supply, and it must be installed by a licensed electrician. The motor must never be run before the blades and assembly are complete.\u003c\/p\u003e\n","brand":"LumePorch","offers":[{"title":"Remote Control","offer_id":68057964446016,"sku":"LP-FAN035","price":238.95,"currency_code":"AUD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1000\/6252\/7808\/files\/timber-ring-low-profile-ceiling-fan-with-light-03.jpg?v=1794114871","url":"https:\/\/lumeporch.com\/products\/timber-ring-low-profile-ceiling-fan-with-light","provider":"LumePorch","version":"1.0","type":"link"}