Mid-Century Brass Finish Black Shade Bedside Table Lamp lit on a walnut bedside table in a panelled bedroom

Mid-Century Brass Finish Black Shade Bedside Table Lamp

$294.95
Skip to product information
Mid-Century Brass Finish Black Shade Bedside Table Lamp lit on a walnut bedside table in a panelled bedroom
1/8

In stock · Ready to ship

Mid-Century Brass Finish Black Shade Bedside Table Lamp

Product ID: LP-TBL113

$294.95

The extra discount comes off automatically in the cart.

Dispatched within 1–3 business days.

Free shipping Australia-wide. Dispatched in 1–3 business days, then 7–14 business days in transit.

  • Free tracked delivery Australia-wide
  • 30-day returns, no restocking fee
  • Secure checkout
  • Brushed brass-tone capsule on a flat black disc base, under a tapered black fabric shade finished with a polished gold-tone band
  • 42 cm high with a shade 25 cm across, so it stands shorter than a standard bedside table is tall
  • One E27 socket, no bulb supplied, and the Australian plug fitted at the factory
Payment methods
  • American Express
  • Apple Pay
  • Google Pay
  • Mastercard
  • Shop Pay
  • Union Pay
  • Visa

The Mid-Century Brass Finish Black Shade Bedside Table Lamp is a plug-in lamp built on an iron body: a rounded, brushed brass-tone capsule standing on a flat black disc base, carrying a tapered black fabric shade 25 cm across the shade with a polished gold-tone band around its lower rim. It stands 42 cm high, and the light leaves the shade through its open top and its open bottom.

It takes one standard E27 bulb, which screws into the holder under the shade. The manufacturer states that no bulb is supplied, so the brightness and the colour of the light are set by the bulb chosen for it. The lamp is ordered with the Australian plug fitted, for an input the manufacturer lists as AC 85 to 265 V.

Specifications
Dimensions 25 cm across the shade x 42 cm high, as measured on the manufacturer's own drawing
Materials Iron body with an electroplated finish, cloth shade
Finish Brushed brass-tone capsule on a flat black disc base with a non-slip underside; black fabric shade with a polished gold-tone band at its lower edge and a pale lining
Light source 1 x E27 socket
Bulb included No. The manufacturer states that a bulb is not supplied
Maximum wattage Not stated by the manufacturer
Colour temperature Set by the bulb chosen. The lamp has no colour-changing control
Dimmable No, as stated by the manufacturer
Control The manufacturer lists a knob switch and does not state where it sits on the lamp. Touch control is not listed
Power Mains powered, plug-in
Input voltage AC 85 to 265 V, as stated by the manufacturer, which covers the Australian 230 V supply
Plug Australian plug, ordered as the plug option of this model
Cord length Not stated by the manufacturer
Lumens Not stated by the manufacturer
Suggested area Approx. 3 to 8 square metres, as stated by the manufacturer
IP rating Not stated by the manufacturer. For indoor use in dry areas
Weight Not stated by the manufacturer
Installation Freestanding, plug-in, no wiring
Width 25 cm
Design Mid-century, Retro
Colour family Black, Brass
Number of lights 1

Sold as a single lamp.

What's in the box
  • 1 x table lamp with its black fabric shade, Australian plug fitted
  • No bulb. The manufacturer states that a bulb is not supplied, so one E27 bulb is needed before the lamp can be used
Installation and Care

Installation

No wiring and no electrician are needed. Set the lamp on a flat, stable surface, screw an E27 bulb firmly into the holder under the shade, then plug the lamp into a power point. Any electrical work beyond plugging it in is a job for a licensed electrician.

Care

Unplug the lamp and let the bulb cool before cleaning. Wipe the metal with a soft, dry cloth, or a lightly damp one followed by a dry one, and skip abrasive cleaners, which can mark the brass-tone finish. Dust the fabric shade with a soft brush or a lint roller and keep water off the fabric. Keep the lamp away from damp areas and direct heat.

Questions about this light? Contact LumePorch at info@lumeporch.com or +61 450 630 097 (Mon–Fri, 9am–5pm AEST). Every message receives a reply within 24 hours on business days.

Returns and Refunds
  • 30-day returns from the day the order is delivered
  • Items must be unused, in original condition and in the original packaging
  • No restocking fee
  • Return shipping is covered by LumePorch for damaged, defective or incorrect items; other returns are shipped back at the customer's cost
  • Approved refunds are issued to the original payment method within 5–10 business days after inspection

View the full Return & Refund Policy

Need help? Email info@lumeporch.com

Shipping and Delivery
  • Free standard shipping on all orders within Australia (no minimum)
  • Handling time: 1–3 business days (Monday–Friday)
  • Transit time: 7–14 business days after dispatch
  • Total delivery time: 8–17 business days
  • Orders placed after 5pm AEST, or on weekends and public holidays, begin processing the next business day
  • Tracking details are emailed as soon as the order is dispatched

Delivery estimates are provided as a guide; if an unexpected delay occurs, the customer is notified by email.

View the full Shipping Policy

Track an order on the Track Your Order page

Need help? Email info@lumeporch.com

Free Standard Shipping

Australia-wide, 8–17 business days in total

Customer Support

Reply within 24 hours on business days

30-Day Returns

No restocking fee

Secure Checkout

Encrypted via Shopify Payments

Brass capsule, black disc

A rounded brass-tone capsule stands on a flat black disc base with a non-slip underside, and a short black rod carries the shade above it.

Bedside height, 42 cm

42 cm high with a shade 25 cm across, so the lower rim sits below eye level for someone sitting up in bed or working at a desk.

Australian plug, nothing to adapt

The Australian plug is fitted at the factory and the manufacturer states an AC 85 to 265 V input, so the lamp goes straight into a power point.

Mid-Century Brass Finish Black Shade Bedside Table Lamp unlit on a travertine side table beside a sofa

Light up and down, not through

The shade is black cloth over an open tapered drum, lined in pale cream and finished with a polished gold-tone band around its lower rim. The black fabric is close to opaque, so most of the light leaves through the open top and the open bottom: a bright pool on the surface below and a soft wash up the wall behind, rather than an all-round glow. The brass-tone capsule and the black disc stay dark against that light, which is what makes the gold band read across a room.

SIZE & PLACEMENT

How big it is, and where it fits

LumePorchSize guide
25 cmmug 9.5 cmthis lamp 42 cmbottle 30 cm42drawn to scale · 42 cm high · shade 25 cm across
Size
42 cm high with a shade 25 cm across — shorter than a standard 55 cm bedside table is tall, and about a hand taller than a wine bottle
Light
One E27 socket, no bulb supplied. The black shade sends the light down onto the surface and up the wall rather than through the fabric. Not dimmable
Power
Plug-in, AC 85 to 265 V, with the Australian plug fitted by the manufacturer

Where is it going?

One each side, on a bedside table at least 35 cm deep. The shade is 25 cm across, so it leaves room for a glass and a book on a standard bedside table. At 42 cm the lamp is shorter than the 55 cm table it stands on, and on a table that height the lower rim of the shade lands below eye level when sitting up, so the light falls on the page.
A pair, one towards each end, about 35 cm in from the edges. A single lamp on a long console leaves the far end dark. Allow at least 15 cm of clear surface around each 25 cm shade. Enter the length below to see how many suit.

Enter the length in centimetres.

One lamp, at the back corner of the desk. At 42 cm high the shade sits below the line of sight across a desk, and the light lands on the work surface. On a shelf, allow 45 cm of clear height and 30 cm of depth. Indoor dry areas only: the manufacturer does not state an IP rating.

Measurements above are the manufacturer's. Send the table or console measurements to info@lumeporch.com and the team will reply with a suggestion.

Two Mid-Century Brass Finish Black Shade Bedside Table Lamps lit on an oak sideboard

Better in pairs

At 25 cm across the shade and 42 cm high, two of them sit on a pair of bedside tables, or one at each end of a sideboard, without taking over the surface. Matching shades on both sides keep the light even across a bed or a long sideboard, where a single lamp leaves one end dark. Black and brass-tone metal sits easily with oak, walnut and pale plaster, and the black shade keeps a pair quiet in daylight, with neither of them switched on.

FAQ

Frequently asked questions

How big is it, really?

25 cm across the shade and 42 cm high, measured on the manufacturer's own drawing. That is shorter than a standard 55 cm bedside table is tall, so the shade clears a glass and a book beside it. The manufacturer suits the lamp to a space of about 3 to 8 square metres.

Does it come with a bulb?

No. The manufacturer states in its own specification that no bulb is supplied. The lamp takes one standard E27 bulb, which screws into the holder under the shade, and that bulb sets the brightness and the colour temperature: about 2700 to 3000K suits a bedside, a cool white suits a desk. The maximum wattage of the socket is not stated by the manufacturer.

Does it suit Australian power points?

Yes. The Australian plug is fitted at the factory, and the manufacturer states an input of AC 85 to 265 V, which covers the Australian 230 V supply, so no adaptor and no plug change are needed. It is for indoor use in dry areas: no IP rating is stated. Any electrical work beyond plugging it in is a job for a licensed electrician.

What is the shade made of, and what about creasing?

Black cloth over an open tapered drum frame, lined in pale cream, with a polished gold-tone metal band around the lower rim. The body below it is iron with an electroplated brass-tone finish, not solid brass. The shade travels inside the box with the lamp, so light creasing from the packing can happen; creasing that does not settle once the shade is back on the lamp should be reported within 7 days of delivery.

Is it a touch lamp, and can the light be dimmed?

No. The manufacturer does not list touch control, a colour-changing function or dimming for this lamp. Its own specification lists a knob switch and lists the lamp as not dimmable, and it does not state where that switch sits. In the manufacturer's photographs the cord is plain, with no switch on it, and the lampholder under the shade is a plain E27 socket.

How much does shipping cost, and where does LumePorch ship?

Standard shipping is free on all orders, with no minimum order value and no additional shipping fees at checkout. Orders ship to addresses within Australia only, including every state and territory.

How long does delivery take?

Handling time is 1–3 business days and transit time is 7–14 business days, so total delivery time is 8–17 business days. Orders placed after 5pm AEST, or on weekends and public holidays, begin processing the next business day. See the Shipping Policy.

How is an order tracked, and what happens if a parcel goes missing?

Every order ships with tracking, and the tracking number is emailed as soon as the order is dispatched. If tracking has not updated or the order has not arrived within the estimated window, email info@lumeporch.com: the team investigates with the carrier and sends a replacement or refund where the parcel is confirmed lost. Details are on the Track Your Order page.

What is the return period, and what condition must items be in?

Returns can be requested within 30 days of delivery. Items must be unused, in their original condition and in the original packaging. There is no restocking fee. See the Return & Refund Policy.

How is a return started, and who pays for return shipping?

Email info@lumeporch.com with the order number and the reason for the return. The team replies within 24 hours on business days with the return address and instructions. Return shipping is paid by the customer, except when an item arrives damaged, defective or incorrect, in which case the return is covered by LumePorch.

What if an item arrives damaged or defective, and when are refunds issued?

Items that arrive damaged, defective or incorrect should be reported within 7 days of delivery, with photos, for a replacement or a full refund. Approved refunds are issued to the original payment method within 5–10 business days after the return is received and inspected.

How can LumePorch be contacted?

Email info@lumeporch.com or call +61 450 630 097. Customer service hours are Monday to Friday, 9am–5pm AEST, and every message receives a reply within 24 hours on business days.

Detailed Specifications

Dimensions, materials and light output listed

Selected for Design

Chosen for design, materials and everyday practicality

Australian Business

Based in Mascot, NSW, with prices in AUD

LumePorch logo
LumePorch

Black November at LumePorch

Buy more than one piece and the discount comes off automatically at checkout, up to 20%. Orders over $400 also come with a free table lamp, and orders over $1,200 come with a free ceiling fan.

One gift per order, on top of the volume discount. Offer ends 30 November.

Shop Black November

You may also like

LumePorch logo

Black November at LumePorch

Up to 20% off, plus a free gift on orders over $400. Free standard shipping Australia-wide. Ends 30 November.