Retro Parchment Shade Walnut Tone Wood Bedside Table Lamp
In stock · Ready to ship
Retro Parchment Shade Walnut Tone Wood Bedside Table Lamp
Product ID: LP-TBL111
The extra discount comes off automatically in the cart.
Spend more, get the bigger gift.
One gift per order · the highest you unlock, on top of the volume discount.
Dispatched within 1–3 business days.
Free shipping Australia-wide. Dispatched in 1–3 business days, then 7–14 business days in transit.
- Free tracked delivery Australia-wide
- 30-day returns, no restocking fee
- Secure checkout
- Parchment paper shade, 30 cm across, laced with jute rope at both rims
- Turned solid rubberwood base in a walnut tone; 40 cm high overall
- Takes one E27 bulb, switched with a push button
The Retro Parchment Shade Walnut Tone Wood Bedside Table Lamp is a small plug-in lamp built on a turned solid rubberwood base in a warm reddish walnut tone, under a wide cone-shaped shade of parchment paper. The shade is bound at the top and bottom rims with a dark brown band and laced right around both rims with natural jute rope, so the light leaves through mottled, amber-toned paper and spills out of the open bottom of the cone. It measures 30 cm across the shade and 40 cm high.
The base is turned from one piece of solid wood into a tapered cone, widest at the foot and narrowing to a slim neck where the shade sits. The lamp runs from a plain mains cord and takes one E27 bulb, switched with a push button. The manufacturer lists this version as having three colour settings.
Specifications
| Dimensions | 30 cm across the shade x 40 cm high overall, as stated by the manufacturer. The shade is the widest part |
| Base diameter | Not stated by the manufacturer |
| Materials | Solid rubberwood base and parchment paper shade, as stated by the manufacturer |
| Shade | Parchment paper cone with a dark brown binding band at the top and bottom rims, laced all round with natural jute rope |
| Finish | Warm reddish walnut-tone wood with visible grain; cream-and-amber parchment |
| Light source | One E27 bulb. This is a socket, not an integrated LED, so the bulb is replaceable |
| Bulb supplied | Not stated by the manufacturer |
| Maximum wattage | Not stated by the manufacturer |
| Light settings | The manufacturer lists this version as having three colour settings; the colour temperatures are not stated. A remote-dimmer version is listed separately by the manufacturer |
| Colour temperature | Not stated by the manufacturer |
| Luminous flux | Not stated by the manufacturer |
| Control | Push-button switch, as stated by the manufacturer. The listing does not say where on the lamp the button sits |
| Power supply | Mains cord, plug-in. The cord is plain, with no switch or control box along it in the manufacturer's photographs |
| Input voltage | Not stated by the manufacturer |
| Plug | Not stated by the manufacturer. The listing offers no choice of plug, so a plug adaptor may be needed for Australian power points and is not supplied |
| Australian approval marks | Not stated by the manufacturer |
| Cord length | Not stated by the manufacturer |
| IP rating | Not stated by the manufacturer. For indoor use in dry areas only |
| Weight | Packed weight 2.5 kg, as stated by the manufacturer. The weight of the lamp alone is not stated |
| Installation | Freestanding, no wiring. The shade is fitted to the base on arrival |
| Width | 30 cm |
| Design | Japandi, Retro |
| Colour family | Beige, Brown |
| Number of lights | 1 |
Sold as a single lamp.
What's in the box
- 1 x turned solid wood base with its mains cord and push-button switch
- 1 x parchment paper cone shade with jute rope lacing
- The manufacturer does not state whether an E27 bulb is packed with the lamp
- No plug adaptor for Australian power points is supplied
Installation and Care
Installation
No wiring and no electrician are needed to set the lamp up. Stand it on a flat, stable surface at least 35 cm deep, back from the edge, seat the parchment shade on the neck of the wooden base, fit an E27 bulb within the wattage marked on the lamp, then plug it in and press the button on the lamp to switch it on. The manufacturer does not state the plug type or the input voltage, so check both before use; if the plug is not the Australian flat-pin type, a plug adaptor is needed and is not supplied. A licensed electrician can advise on anything that is not clear from the markings on the lamp.
Care
Switch the lamp off, unplug it and let the bulb cool before cleaning. The shade is paper: dust it with a dry, soft brush or a dry cloth only, and keep it away from water, steam and solvents, because a damp cloth will mark parchment. Wipe the wooden base with a dry or barely damp cloth and dry it at once. Do not pull or twist the jute lacing, and keep the lamp away from heat sources, open flames, curtains and damp areas.
Questions about this light? Contact LumePorch at info@lumeporch.com or +61 450 630 097 (Mon–Fri, 9am–5pm AEST). Every message receives a reply within 24 hours on business days.
Returns and Refunds
- 30-day returns from the day the order is delivered
- Items must be unused, in original condition and in the original packaging
- No restocking fee
- Return shipping is covered by LumePorch for damaged, defective or incorrect items; other returns are shipped back at the customer's cost
- Approved refunds are issued to the original payment method within 5–10 business days after inspection
View the full Return & Refund Policy
Need help? Email info@lumeporch.com
Shipping and Delivery
- Free standard shipping on all orders within Australia (no minimum)
- Handling time: 1–3 business days (Monday–Friday)
- Transit time: 7–14 business days after dispatch
- Total delivery time: 8–17 business days
- Orders placed after 5pm AEST, or on weekends and public holidays, begin processing the next business day
- Tracking details are emailed as soon as the order is dispatched
Delivery estimates are provided as a guide; if an unexpected delay occurs, the customer is notified by email.
Track an order on the Track Your Order page
Need help? Email info@lumeporch.com
Parchment shade
A wide cone of mottled cream-and-amber parchment paper, 30 cm across, throws the light down onto the surface and a warm glow through the paper.
Jute rope lacing
A dark brown band runs around the top rim and the bottom rim, and natural jute rope is laced through each one in a visible whipstitch.
Turned solid wood base
One piece of solid rubberwood turned into a tapered cone, widest at the foot, in a warm reddish walnut tone with the grain left visible.
Bedside height, 40 cm
A 30 cm cone of parchment paper on a turned wooden base, 40 cm high in all. On a bedside table the rim of the shade sits a little above the shoulder of someone sitting up in bed, so the light falls on the page and on the table rather than into the eyes. The shade is closed at the top, so the glow is warm and low, and the same height works on a hall console, a sideboard or the end of a desk.
SIZE & PLACEMENT
Where it works
Size guide- Size
- 30 cm across the bottom of the parchment shade and 40 cm high overall, as stated by the manufacturer. The width of the wooden foot is not stated
- What it stands on
- A flat surface at least 35 cm deep, near a power point: a bedside table, a sideboard, a hall console or a desk. Freestanding, nothing to fix
- Light
- One E27 bulb under the shade, so the bulb is replaceable. The manufacturer lists this version as having three colour settings, and does not state the colour temperatures, the wattage or whether a bulb is packed with the lamp
- Power
- Mains, through a plain cord with a push-button switch. The input voltage and the plug type are not stated by the manufacturer
Where is it going?
Enter the width of the top to see how it fits.
Measurements are the manufacturer's own and allow a small tolerance. Send the surface measurements to info@lumeporch.com and the team will reply with placement advice.
Better in pairs
At 30 cm across, the shade covers about two thirds of a standard 45 cm bedside table, so two of them fit one on each side of a bed without crowding either surface. One at each end of a sideboard does the same across a room. The reddish walnut tone of the wood and the amber of the parchment sit easily with timber furniture, linen and warm, earthy colours.
FAQ
Frequently asked questions
How big is the Retro Parchment Shade Walnut Tone Wood Bedside Table Lamp?
30 cm across the shade and 40 cm high overall, as stated by the manufacturer. The shade is the widest part of the lamp, so it needs a surface at least 35 cm deep. Those dimensions suit a bedside table, a console, a sideboard or a desk.
What is the shade made of?
Parchment paper, as stated by the manufacturer. It is a cone shade with a dark brown binding band at the top rim and the bottom rim, and natural jute rope laced all the way round through both bands, which is the detail the manufacturer photographs in close-up. Because the shade is paper, it should only ever be dusted dry.
Which bulb does it take, and is one included?
It takes one E27 bulb, the common screw type, so the bulb is replaceable. Whether a bulb is packed with the lamp is not stated by the manufacturer, and neither is the maximum wattage, so check the marking on the lamp before fitting a bulb.
Is it an LED lamp?
No. There is no sealed LED module in this lamp: it has an open E27 socket under the shade, and any suitable E27 bulb, LED or otherwise, can be fitted.
How is it switched on?
With a push-button switch, as stated by the manufacturer. The listing does not say where on the lamp the button sits, and the cord in the manufacturer's photographs is plain, with no switch or control box along it. The manufacturer lists this version as having three colour settings, but does not state the colour temperatures.
Does it fit Australian power points?
The manufacturer does not state the plug type and the listing offers no choice of plug, so a plug adaptor may be needed and is not supplied. The input voltage is not stated either, and no Australian approval marks are stated. Check both markings on the lamp before use, and ask a licensed electrician if anything is unclear.
Can it be used in a bathroom or outdoors?
No. There is no IP rating stated by the manufacturer, and the shade is paper, so the lamp is for indoor use in dry areas only.
What material is the base?
Solid rubberwood, as stated by the manufacturer, turned into a tapered cone and finished in a warm reddish walnut tone. The walnut tone describes the colour of the finish, not the species of the timber. The width of the foot is not stated by the manufacturer.
How much does shipping cost, and where does LumePorch ship?
Standard shipping is free on all orders, with no minimum order value and no additional shipping fees at checkout. Orders ship to addresses within Australia only, including every state and territory.
How long does delivery take?
Handling time is 1–3 business days and transit time is 7–14 business days, so total delivery time is 8–17 business days. Orders placed after 5pm AEST, or on weekends and public holidays, begin processing the next business day. See the Shipping Policy.
How is an order tracked, and what happens if a parcel goes missing?
Every order ships with tracking, and the tracking number is emailed as soon as the order is dispatched. If tracking has not updated or the order has not arrived within the estimated window, email info@lumeporch.com: the team investigates with the carrier and sends a replacement or refund where the parcel is confirmed lost. Details are on the Track Your Order page.
What is the return period, and what condition must items be in?
Returns can be requested within 30 days of delivery. Items must be unused, in their original condition and in the original packaging. There is no restocking fee. See the Return & Refund Policy.
How is a return started, and who pays for return shipping?
Email info@lumeporch.com with the order number and the reason for the return. The team replies within 24 hours on business days with the return address and instructions. Return shipping is paid by the customer, except when an item arrives damaged, defective or incorrect, in which case the return is covered by LumePorch.
What if an item arrives damaged or defective, and when are refunds issued?
Items that arrive damaged, defective or incorrect should be reported within 7 days of delivery, with photos, for a replacement or a full refund. Approved refunds are issued to the original payment method within 5–10 business days after the return is received and inspected.
How can LumePorch be contacted?
Email info@lumeporch.com or call +61 450 630 097. Customer service hours are Monday to Friday, 9am–5pm AEST, and every message receives a reply within 24 hours on business days.
Detailed Specifications
Dimensions, materials and light output listed
Selected for Design
Chosen for design, materials and everyday practicality
Australian Business
Based in Mascot, NSW, with prices in AUD
Black November at LumePorch
Buy more than one piece and the discount comes off automatically at checkout, up to 20%. Orders over $400 also come with a free table lamp, and orders over $1,200 come with a free ceiling fan.
One gift per order, on top of the volume discount. Offer ends 30 November.
You may also like
Black November at LumePorch
Up to 20% off, plus a free gift on orders over $400. Free standard shipping Australia-wide. Ends 30 November.