Sculptural Mountain Bronze Finish Resin Table Lamp
In stock · Ready to ship
Sculptural Mountain Bronze Finish Resin Table Lamp
Product ID: LP-TBL125
The extra discount comes off automatically in the cart.
Spend more, get the bigger gift.
One gift per order · the highest you unlock, on top of the volume discount.
Dispatched within 1–3 business days.
Free shipping Australia-wide. Dispatched in 1–3 business days, then 7–14 business days in transit.
- Free tracked delivery Australia-wide
- 30-day returns, no restocking fee
- Secure checkout
- Resin base sculpted as a small mountain range: a tall craggy peak, a lower one and a saddle between them
- Antique bronze finish on the peaks over a matte black, finely stippled plinth
- White fabric drum shade, as wide as the base, sitting just above the tall peak
- 35 cm wide and 42 cm high, as stated by the manufacturer
- One E27 bulb, not included: the manufacturer lists a 6 to 10 W LED bulb; not dimmable
The Sculptural Mountain Bronze Finish Resin Table Lamp is a plug-in table lamp whose base is a small resin sculpture of a mountain range: a tall craggy peak and a lower rounded one rise from a matte black plinth, and the rocky peaks carry an antique bronze finish. A wide white fabric drum shade sits just above the tall peak and spreads the light of a single E27 bulb. The manufacturer gives it as 35 cm wide and 42 cm high.
The bulb is not included: the manufacturer lists the light source as one LED bulb of 6 to 10 W, and the lamp is not dimmable. The manufacturer shows it in living rooms, bedrooms, studies and entry halls.
Specifications
| Dimensions | 35 cm wide x 42 cm high, as stated by the manufacturer (measured by hand, small tolerance). Depth not stated by the manufacturer |
| Materials | Resin base, iron and a fabric shade, as listed by the manufacturer |
| Finish | Antique bronze on the peaks, matte black on the plinth; white fabric shade |
| Light source | 1 x E27 bulb holder. Bulb not included. The manufacturer lists the light source as an LED bulb of 6 to 10 W |
| Colour temperature | Depends on the bulb fitted. Not stated by the manufacturer |
| Dimmable | No, as stated by the manufacturer |
| Control | On/off switch. The switch type and position are not stated by the manufacturer |
| Power | Mains powered, plug-in |
| Input voltage | 220 V, as stated by the manufacturer, which suits the Australian 230 V supply |
| Cord length | Not stated by the manufacturer |
| Suggested area | About 5 to 10 m², as suggested by the manufacturer |
| IP rating | Not stated by the manufacturer. For indoor use in dry areas only |
| Weight | Weight of the lamp not stated by the manufacturer; the packed shipping weight is listed as about 4.5 kg |
| Installation | Freestanding plug-in lamp, no wiring |
| Width | 35 cm |
| Design | Contemporary, Japandi, Sculptural |
| Colour family | Black, Bronze, White |
| Number of lights | 1 |
Sold as a single lamp.
What's in the box
- 1 x table lamp: resin mountain base and white fabric shade
The bulb is not included. The manufacturer does not publish a packing list.
Installation and Care
Installation
No wiring and no electrician are needed for a plug-in lamp. Fit one E27 LED bulb (not included), stand the lamp on a flat, stable surface with some room around the shade, plug it into a power point and switch it on. Any change to the cord or plug must only be made by a licensed electrician.
Care
Switch the lamp off, unplug it and let the bulb cool before cleaning. Dust the resin base with a soft, dry brush to reach into the textured ridges, and avoid abrasive or solvent cleaners, which can wear the bronze finish. Dust the fabric shade with a soft brush or a dry cloth and keep it dry. Keep water away from the cord, the switch and the bulb holder.
Questions about this light? Contact LumePorch at info@lumeporch.com or +61 450 630 097 (Mon–Fri, 9am–5pm AEST). Every message receives a reply within 24 hours on business days.
Returns and Refunds
- 30-day returns from the day the order is delivered
- Items must be unused, in original condition and in the original packaging
- No restocking fee
- Return shipping is covered by LumePorch for damaged, defective or incorrect items; other returns are shipped back at the customer's cost
- Approved refunds are issued to the original payment method within 5–10 business days after inspection
View the full Return & Refund Policy
Need help? Email info@lumeporch.com
Shipping and Delivery
- Free standard shipping on all orders within Australia (no minimum)
- Handling time: 1–3 business days (Monday–Friday)
- Transit time: 7–14 business days after dispatch
- Total delivery time: 8–17 business days
- Orders placed after 5pm AEST, or on weekends and public holidays, begin processing the next business day
- Tracking details are emailed as soon as the order is dispatched
Delivery estimates are provided as a guide; if an unexpected delay occurs, the customer is notified by email.
Track an order on the Track Your Order page
Need help? Email info@lumeporch.com
A mountain range in miniature
A tall craggy peak and a lower rounded one rise from the plinth, with a shallow saddle between them. The rocky faces carry an antique bronze finish that catches the light along the ridges.
Bronze over black
The peaks are antique bronze; the plinth beneath them is matte black with a fine stippled texture, and it rises across the front like a lower ridge of foothills. Switched off, the base still reads as a small sculpture.
One E27 bulb
The lamp takes one E27 bulb, which is not included. The manufacturer lists an LED bulb of 6 to 10 W; the brightness and the colour of the light depend on the bulb fitted, and the lamp is not dimmable.
A sculpture that also lights the room
Switched off, the base is a small resin sculpture of a mountain range, finished in antique bronze over matte black. Switched on, the white shade glows above the tall peak and the light picks out the rocky texture of the ridges. At 35 cm wide and 42 cm high, as stated by the manufacturer, it gives a console, a sideboard or a desk a focal point.
SIZE & PLACEMENT
Where it works
Size guide- Size
- 35 cm wide · 42 cm high · as stated by the manufacturer, measured by hand. Depth not stated
- Base
- A resin mountain range: antique bronze peaks over a matte black, finely stippled plinth
- Shade
- White fabric drum, as wide as the base, sitting just above the tall peak
- Light
- 1 × E27 bulb, not included · the manufacturer lists a 6–10 W LED bulb · not dimmable
- Power
- Plug-in, mains · 220 V as listed by the manufacturer, which suits the Australian 230 V supply
Where is it going?
Enter the length of the console or sideboard to see whether one lamp or a pair suits it.
Measurements are the manufacturer’s own, taken by hand, and allow a small tolerance. Send the surface measurements to info@lumeporch.com and the team will reply with placement advice.
Better in pairs
Two of them, one at each end of a long sideboard or on a pair of bedside tables, frame the space between them and balance the light across the room. The bronze and black tones sit well with walnut, oak, linen and warm white walls.
FAQ
Frequently asked questions
How big is the Sculptural Mountain Bronze Finish Resin Table Lamp?
The manufacturer gives it as 35 cm wide and 42 cm high, measured by hand, so allow a small tolerance. The depth and the weight of the lamp itself are not stated; packed for shipping it is listed at about 4.5 kg. It suits a hall console, a sideboard, a desk or a wide bedside table.
Is the base solid bronze?
No. The base is resin, with an antique bronze finish on the peaks and a matte black plinth beneath them. The manufacturer lists resin, iron and fabric as the materials, and the shade is white fabric.
What bulb does it take, and is one included?
One E27 bulb, which is not included. The manufacturer lists the light source as an LED bulb of 6 to 10 W. A maximum bulb wattage is not stated, so an LED bulb in that range is the one to fit.
Is it dimmable, and where is the switch?
It is not dimmable, as stated by the manufacturer; the brightness depends on the bulb fitted. The type and position of the on/off switch and the length of the cord are not stated by the manufacturer.
Will it work on Australian power?
The manufacturer lists the lamp at 220 V, which suits the Australian 230 V supply. It is a plug-in lamp with no wiring to do; any change to its cord or plug must only be made by a licensed electrician.
Can it be used outdoors?
No. The manufacturer states no IP rating, so the lamp is for indoor use in dry areas only, away from damp. Water and cleaning sprays should be kept away from the cord, the switch and the bulb holder.
How much does shipping cost, and where does LumePorch ship?
Standard shipping is free on all orders, with no minimum order value and no additional shipping fees at checkout. Orders ship to addresses within Australia only, including every state and territory.
How long does delivery take?
Handling time is 1–3 business days and transit time is 7–14 business days, so total delivery time is 8–17 business days. Orders placed after 5pm AEST, or on weekends and public holidays, begin processing the next business day. See the Shipping Policy.
How is an order tracked, and what happens if a parcel goes missing?
Every order ships with tracking, and the tracking number is emailed as soon as the order is dispatched. If tracking has not updated or the order has not arrived within the estimated window, email info@lumeporch.com: the team investigates with the carrier and sends a replacement or refund where the parcel is confirmed lost. Details are on the Track Your Order page.
What is the return period, and what condition must items be in?
Returns can be requested within 30 days of delivery. Items must be unused, in their original condition and in the original packaging. There is no restocking fee. See the Return & Refund Policy.
How is a return started, and who pays for return shipping?
Email info@lumeporch.com with the order number and the reason for the return. The team replies within 24 hours on business days with the return address and instructions. Return shipping is paid by the customer, except when an item arrives damaged, defective or incorrect, in which case the return is covered by LumePorch.
What if an item arrives damaged or defective, and when are refunds issued?
Items that arrive damaged, defective or incorrect should be reported within 7 days of delivery, with photos, for a replacement or a full refund. Approved refunds are issued to the original payment method within 5–10 business days after the return is received and inspected.
How can LumePorch be contacted?
Email info@lumeporch.com or call +61 450 630 097. Customer service hours are Monday to Friday, 9am–5pm AEST, and every message receives a reply within 24 hours on business days.
Detailed Specifications
Dimensions, materials and light output listed
Selected for Design
Chosen for design, materials and everyday practicality
Australian Business
Based in Mascot, NSW, with prices in AUD
Black November at LumePorch
Buy more than one piece and the discount comes off automatically at checkout, up to 20%. Orders over $400 also come with a free table lamp, and orders over $1,200 come with a free ceiling fan.
One gift per order, on top of the volume discount. Offer ends 30 November.
You may also like
Black November at LumePorch
Up to 20% off, plus a free gift on orders over $400. Free standard shipping Australia-wide. Ends 30 November.