Stainless Steel Ceiling Fan with Light and Remote
In stock · Ready to ship
Stainless Steel Ceiling Fan with Light and Remote
Product ID: LP-FAN033 · SKU: LP-FAN033-106
The extra discount comes off automatically in the cart.
Spend more, get the bigger gift.
One gift per order · the highest you unlock, on top of the volume discount.
Dispatched within 1–3 business days.
Free shipping Australia-wide. Dispatched in 1–3 business days, then 7–14 business days in transit.
- Free tracked delivery Australia-wide
- 30-day returns, no restocking fee
- Secure checkout
- Remote control included — six fan speeds, the summer/winter direction, the light and a 1, 2, 4 or 8 hour timer, all from the one handset
- 48 W tri-colour LED behind a 30 cm acrylic shade: warm white 3000 K, neutral 4000 K or cool white 6000 K, switched and dimmed from the remote
- Three sweeps — 106, 122 and 132 cm — with five pressed stainless steel blades, a pure copper motor and two downrods (10 cm and 20 cm) in the box
The Stainless Steel Ceiling Fan with Light and Remote is the all-metal fan of the range: five pressed stainless steel blades on a satin nickel body, with a round 48 W LED behind an acrylic shade under the motor. It comes in three sweeps — 106 cm, 122 cm and 132 cm — so the same fan fits a bedroom, a kitchen or a full open-plan living room, and the motor is wound in pure copper on a silicon steel core.
The motor runs both ways, so the fan works all year. Forward in summer, the blades push air down and the moving air feels several degrees cooler. Reversed in winter, they draw air up and send the warm air that collects at ceiling level back down the walls. Direction, six speeds, the light and a timer are all set from the remote control supplied.
Specifications
| Blade sweep | 106 cm (42 inch), 122 cm (48 inch) or 132 cm (52 inch), five blades |
| Blades | Pressed stainless steel, satin finish |
| Body | Iron and stainless steel in a satin nickel finish, with an acrylic lamp shade |
| Motor | Pure copper windings on silicon steel, reversible, six speeds. The motor type is not otherwise stated by the manufacturer |
| Light | Integrated 48 W LED behind a 30 cm acrylic shade: warm white 3000 K, neutral 4000 K or cool white 6000 K, dimmable from the remote |
| Control | Remote control included; batteries for the remote are not included. The manufacturer also pictures a wireless wall panel but does not state that it is included |
| Timer | 1, 2, 4 or 8 hours, set from the remote |
| Mounting | Downrod mount with a 15 cm canopy. Two rods are supplied, 10 cm and 20 cm, for a total drop of 36 cm or 46 cm |
| Room size | 8–15 m² (106 cm), 12–20 m² (122 cm) or 15–25 m² (132 cm), as rated by the manufacturer |
| Clearance | Leave at least 2.1 m between the floor and the blades |
| Voltage | 220 V, suits the Australian 230 V supply |
| Certification | The manufacturer lists CE, CCC, RoHS, LVD and EMC. No Australian approval mark is stated |
| Weight | About 6 kg |
| IP rating | Not stated by the manufacturer. For indoor rooms and covered, dry areas |
Sold as a single ceiling fan.
What's in the box
- 1 × fan motor with the satin nickel housing and mounting hardware
- 5 × stainless steel blades with screws and brackets
- 1 × LED light kit with the 30 cm acrylic shade
- 2 × downrods, 10 cm and 20 cm
- 1 × canopy, 15 cm
- 1 × remote control, batteries not included
- Fixings and the installation instructions
Installation and Care
Installation
The fan is wired into the mains and must be installed by a licensed electrician. The bracket is fixed to the ceiling, the chosen downrod and the canopy are assembled, the motor is hung and wired, and only then are the five blades bolted on and the light kit fitted. Do not run the motor before all five blades are fitted, and start the blade screws loosely, tightening them once all five are in place so the fan stays balanced. Choose the 10 cm rod for a standard ceiling and the 20 cm rod for a higher one, leave at least 2.1 m between the floor and the blades, and have the electrician confirm that the fixing point will carry the fan.
Care
Switch the fan off at the wall before cleaning. Wipe the blades, the body and the acrylic shade with a dry or barely damp soft cloth, following the length of each blade, and buff the satin finish dry so it does not water-mark. Do not use solvents or abrasive cleaners, and do not let water run into the motor. Check that the blade screws are still tight once a year.
Questions about this light? Contact LumePorch at info@lumeporch.com or +61 450 630 097 (Mon–Fri, 9am–5pm AEST). Every message receives a reply within 24 hours on business days.
Returns and Refunds
- 30-day returns from the day the order is delivered
- Items must be unused, in original condition and in the original packaging
- No restocking fee
- Return shipping is covered by LumePorch for damaged, defective or incorrect items; other returns are shipped back at the customer's cost
- Approved refunds are issued to the original payment method within 5–10 business days after inspection
View the full Return & Refund Policy
Need help? Email info@lumeporch.com
Shipping and Delivery
- Free standard shipping on all orders within Australia (no minimum)
- Handling time: 1–3 business days (Monday–Friday)
- Transit time: 7–14 business days after dispatch
- Total delivery time: 8–17 business days
- Orders placed after 5pm AEST, or on weekends and public holidays, begin processing the next business day
- Tracking details are emailed as soon as the order is dispatched
Delivery estimates are provided as a guide; if an unexpected delay occurs, the customer is notified by email.
Track an order on the Track Your Order page
Need help? Email info@lumeporch.com
Cooler in January, warmer in July
The motor runs both ways. Forward in summer, the five steel blades push air straight down and the moving air feels several degrees cooler — six speeds, from a whisper of movement over a bed to a full breeze across an open-plan room. Reversed in winter, the blades draw air up and push the warm layer that collects at ceiling level back down the walls, so the heating works the whole room instead of the top half of it. Both directions are set from the remote.
Steel, nickel and copper
There is no plastic on show here. The blades are pressed stainless steel, the motor drum and canopy wear a satin nickel finish over an iron and stainless steel body, and inside the drum the motor is wound in pure copper on a silicon steel core — the materials the manufacturer lists, visible in the brushed grain of every surface. The cool silver finish reads as architectural hardware rather than an appliance, against white ceilings and timber alike.
Two downrods in the box
The fan hangs on a downrod under a 15 cm canopy, and the manufacturer supplies two rods to choose from: 10 cm, for a total drop of 36 cm, and 20 cm, for 46 cm under a higher ceiling. Keep at least 2.1 m between the floor and the blades — which makes a ceiling of about 2.5 m the comfortable starting point. On a standard 2.4 m ceiling a low-profile fan is the better choice.
Built from metal, lit from below
Up close, the fan is all machined surfaces: the vented brushed nickel drum, the stacked steel brackets bolting each blade to the hub, the fine satin grain catching the light, and under it the round LED ring glowing warm through its acrylic shade with a brushed aluminium rim. This is the view from the dining table — the part of a ceiling fan that is usually plastic, here finished like the rest of the piece.
SIZE & PLACEMENT
Will it fit the room?
Size guide- Sweep
- 106, 122 or 132 cm (42, 48 or 52 inch), five steel blades
- Mounting
- Downrod under a 15 cm canopy. Two rods supplied: 10 cm and 20 cm
- Total drop
- 36 cm on the short rod, 46 cm on the longer one
- Clearance
- Blades at least 2.1 m above the floor
- Light
- 48 W LED, 3000 / 4000 / 6000 K, dimmable, 30 cm shade
- Room size
- 8–15 m² (106 cm) · 12–20 m² (122 cm) · 15–25 m² (132 cm)
Enter the ceiling height to see how it fits.
Sweeps, drops and room ratings come from the manufacturer's specification sheet; the calculator uses the fan's full 36 cm and 46 cm drops. Send the room size to info@lumeporch.com and the team will reply with placement advice.
One for the room, two for the long space
A single 122 cm fan covers a living room; a long covered alfresco or a family room that runs the length of the house is better served by two in a row, spaced evenly, so the air moves along the whole space instead of pooling in the middle. With no IP rating stated, outdoor use stays under a roof in a dry, covered area — where the warm LED rings earn their keep on summer evenings.
FAQ
Frequently asked questions
What size room does the Stainless Steel Ceiling Fan with Light and Remote suit?
The manufacturer rates the 106 cm sweep for rooms of 8–15 m², the 122 cm for 12–20 m² and the 132 cm for 15–25 m². As a rule of thumb: 106 cm over a bedroom or study, 122 cm in a living room or kitchen, 132 cm in an open-plan living and dining space.
Will it fit a 2.4 m ceiling?
It is tight. Even on the short 10 cm downrod the fan drops 36 cm, which puts its lowest point at about 2.04 m on a 2.4 m ceiling — under the 2.1 m that should stay clear beneath a fan. A ceiling of about 2.5 m or more is the safe fit; on a standard 2.4 m ceiling a low-profile fan is the better choice.
Can the light be dimmed or changed to a different colour?
Yes, both. The 48 W LED switches between warm white 3000 K, neutral 4000 K and cool white 6000 K, and the manufacturer lists it as dimmable — all from the remote. The LED sits behind a 30 cm acrylic shade and is built in, so there are no bulbs to buy or replace.
How does the winter mode work?
The motor reverses from the remote. Running forward in summer, the blades push air down as a breeze. Reversed in winter, they draw air up and send the warm air gathered at ceiling level back down the walls, which evens the room temperature without a draught across the skin.
Are the blades really stainless steel?
Yes. The manufacturer lists the blades as pressed stainless steel and the body as iron and stainless steel in a satin nickel finish, and the detail photographs show the brushed metal grain. The shade over the light is acrylic — the one deliberately non-metal part, there to spread the light evenly.
What does the remote control do?
Everything: the six fan speeds, the forward and reverse direction, the light with its three colour temperatures and dimming, and a timer that switches the fan off after 1, 2, 4 or 8 hours. Batteries for the remote are not included. The manufacturer also pictures a wireless wall panel working alongside the remote, but does not state that the panel is included in the box.
Does it need an electrician?
Yes. It is a hardwired ceiling fan and must be installed by a licensed electrician. The motor must never be run before all five blades are fitted, and the blade screws should be started loosely and tightened once all five are in place so the fan stays balanced.
Can it be used outside?
The manufacturer does not state an IP rating, so it is for indoor rooms and for covered, dry outdoor areas such as a roofed alfresco. It should not be exposed to rain or salt spray.
How long does delivery take?
Handling time is 1–3 business days and transit time is 7–14 business days, so total delivery time is 8–17 business days. Orders placed after 5pm AEST, or on weekends and public holidays, begin processing the next business day. See the Shipping Policy.
What is the return period, and what condition must items be in?
Returns can be requested within 30 days of delivery. Items must be unused, in their original condition and in the original packaging. There is no restocking fee. See the Return & Refund Policy.
What if an item arrives damaged or defective, and when are refunds issued?
Items that arrive damaged, defective or incorrect should be reported within 7 days of delivery, with photos, for a replacement or a full refund. Approved refunds are issued to the original payment method within 5–10 business days after the return is received and inspected.
Detailed Specifications
Dimensions, materials and light output listed
Selected for Design
Chosen for design, materials and everyday practicality
Australian Business
Based in Mascot, NSW, with prices in AUD
Black November at LumePorch
Buy more than one piece and the discount comes off automatically at checkout, up to 20%. Orders over $400 also come with a free table lamp, and orders over $1,200 come with a free ceiling fan.
One gift per order, on top of the volume discount. Offer ends 30 November.
You may also like
Black November at LumePorch
Up to 20% off, plus a free gift on orders over $400. Free standard shipping Australia-wide. Ends 30 November.