Tri Colour LED DC Ceiling Fan with Light
In stock · Ready to ship
Tri Colour LED DC Ceiling Fan with Light
Product ID: LP-FAN018 · SKU: LP-FAN018-100
The extra discount comes off automatically in the cart.
Spend more, get the bigger gift.
One gift per order · the highest you unlock, on top of the volume discount.
Dispatched within 1–3 business days.
Free shipping Australia-wide. Dispatched in 1–3 business days, then 7–14 business days in transit.
- Free tracked delivery Australia-wide
- 30-day returns, no restocking fee
- Secure checkout
- Remote control included — light on and off, three light colours, six fan speeds, a natural wind mode, the summer/winter reverse and a 1, 2 or 4 hour timer
- Low profile at 20 cm: no drop rod at all, so it clears a 2.4 to 2.6 m ceiling where a rod-mounted fan hangs too low
- 100 cm sweep on a reversible six speed DC motor, with a 15 W tri colour LED, for rooms of 15 to 25 m²
The Tri Colour LED DC Ceiling Fan with Light is a low profile ceiling fan: the motor housing bolts straight to the plaster with no drop rod, so the whole fitting hangs only 20 cm below the ceiling. Three broad wood-tone blades sweep 100 cm around a matte black drum, and a round opal LED sits in the base of it. The motor is a six speed DC, the light switches between three whites, and both run from the remote control supplied.
The motor turns both ways, so the same fan earns its place all year. Forward in summer, the blades push air down and that moving air feels several degrees cooler. Reversed in winter, they lift air up so the warm air that collects at ceiling level comes back down the walls instead of sitting above head height. One button on the remote switches between the two.
Specifications
| Blade sweep | 100 cm (42 inch), three blades |
| Total drop | 20 cm from the ceiling to the base of the light. No drop rod — the housing mounts flush |
| Housing | 15 cm across, painted iron drum in matte black, mounted straight to the ceiling bracket |
| Motor | Reversible DC motor, six speeds and a natural wind mode, set from the remote |
| Light | Integrated LED, included. 15 W, 135 mm module, three colour settings: 3000 K warm, 4000 K natural and 6000 K cool white |
| Dimming | Not dimmable. The remote changes the colour of the light, not its brightness |
| Control | Remote control included: all off, light on and off, forward, reverse, natural wind, six speeds, fan off and a 1, 2 or 4 hour timer. Batteries for the remote are not included |
| Room size | Suited to rooms of 15–25 m² |
| Blades | Three ABS blades in a warm wood-grain finish. The manufacturer does not list solid timber |
| Body | Painted iron housing and canopy, acrylic light diffuser |
| Mounting | Hardwired and flush mounted. The ceiling fixing must hold at least 45 kg |
| Weight | The manufacturer lists 4.5–5.2 kg. The shipping carton is 54 × 41 × 19 cm |
| Voltage | AC 85–265 V, 50 Hz, suits the Australian 230 V supply |
| Clearance | The manufacturer asks for at least 2.3 m between the floor and the blades and 45 cm between the blades and any wall |
| Speed control | Speed is set from the remote. The manufacturer states the fan must not be run from a wall-mounted solid-state fan speed controller or dimmer |
| IP rating | Not stated by the manufacturer. The installation manual marks the fan as indoor use only |
| Certification | Not stated for Australia. The fan runs on an 85–265 V input, which suits the Australian 230 V supply |
Sold as a single ceiling fan.
What's in the box
- 1 × motor with the mounting hanger and bracket
- 1 × motor shell and decorative cover
- 3 × wood-tone blades with blade screws and gaskets
- 1 × integrated 15 W LED module with the opal diffuser
- 1 × remote control and receiver
- Expansion screws, self-tapping screws, balance stickers and the installation manual
Installation and Care
Installation
The fan is wired into the mains and must be installed by a licensed electrician. The hanger bracket is fixed to the ceiling first — the manufacturer asks for a fixing that will hold at least 45 kg — the receiver is seated in it, the motor is hung and wired, the shell is turned on and clamped to the bracket, and only then are the three blades bolted on and the LED module and cover fitted. Do not run the motor before all three blades are fitted, and fit the blade screws loosely at first, tightening them once all three are in place. Leave at least 2.3 m between the floor and the blades and 45 cm between the blades and the nearest wall. The manufacturer also states that the fan must not be run from a wall-mounted solid-state fan speed controller or dimmer; speed is set from the remote.
Care
Switch the fan off at the wall before cleaning. Wipe the blades, the drum and the light diffuser with a dry or barely damp soft cloth. The manufacturer states that water and detergents should not be used on the fan. Check the blade screws are tight once a year.
Questions about this light? Contact LumePorch at info@lumeporch.com or +61 450 630 097 (Mon–Fri, 9am–5pm AEST). Every message receives a reply within 24 hours on business days.
Returns and Refunds
- 30-day returns from the day the order is delivered
- Items must be unused, in original condition and in the original packaging
- No restocking fee
- Return shipping is covered by LumePorch for damaged, defective or incorrect items; other returns are shipped back at the customer's cost
- Approved refunds are issued to the original payment method within 5–10 business days after inspection
View the full Return & Refund Policy
Need help? Email info@lumeporch.com
Shipping and Delivery
- Free standard shipping on all orders within Australia (no minimum)
- Handling time: 1–3 business days (Monday–Friday)
- Transit time: 7–14 business days after dispatch
- Total delivery time: 8–17 business days
- Orders placed after 5pm AEST, or on weekends and public holidays, begin processing the next business day
- Tracking details are emailed as soon as the order is dispatched
Delivery estimates are provided as a guide; if an unexpected delay occurs, the customer is notified by email.
Track an order on the Track Your Order page
Need help? Email info@lumeporch.com
One fan, summer and winter
Forward in summer, the blades push air down and that moving air feels several degrees cooler. Reversed in winter, they lift air up so the warm air that collects at ceiling level comes back down the walls instead of sitting above head height. The F and R buttons on the remote switch between the two, which is why the fan stays useful in July rather than being switched off in March.
Twenty centimetres, and that is the whole point
There is no drop rod. The black drum bolts straight to the ceiling bracket, so the entire fitting hangs 20 cm below the plaster — the shallowest three blade fan in the range. In a room with a 2.4 to 2.6 m ceiling that is the difference between a fan that disappears into the ceiling and one that sits in the sightline. The manufacturer asks for 2.3 m of clear air under the blades, which a 2.5 m ceiling gives with room to spare.
Three whites, and a light that can be replaced
The remote steps the LED between 3000 K warm, 4000 K natural and 6000 K cool white, so the same fitting reads soft in a bedroom and crisp over a bench. The light itself is a standard 135 mm, 15 W module that unclips from the base of the drum, which means it can be swapped years later instead of replacing the fan. Brightness is fixed: this one changes colour, not level.
Three blades, read from below
Seen from underneath: three broad honey-oak wood-grain blades at 120 degrees to each other, the matte black drum sitting flat on the plaster with no rod and no stem, and the opal disc lit warm in the middle of it. From the floor the fitting reads as a light with blades rather than as a fan hanging into the room.
SIZE & PLACEMENT
Will it fit the ceiling?
Size guide- Sweep
- 100 cm (42"), three wood-grain blades
- Drop
- 20 cm, flush mounted — no drop rod
- Clearance
- Blades at least 2.3 m above the floor, 45 cm clear of any wall
- Light
- 15 W LED, 3000 / 4000 / 6000 K, not dimmable
- Room size
- 15 to 25 m²
Enter the ceiling height to see how it fits.
Measurements come from the manufacturer's dimension drawing and installation manual. Send the room size to info@lumeporch.com and the team will reply with placement advice.
Two of them over a long room
A 100 cm sweep is a room-sized fan, not a whole-floor one. In a long open-plan kitchen and dining space, two hung in a row cover the length far better than one fan in the middle, and each runs at its own speed from its own remote. In a single room of 15 to 25 m², one is enough.
FAQ
Frequently asked questions
Will the Tri Colour LED DC Ceiling Fan with Light fit a 2.4 m ceiling?
It is built for exactly that ceiling. The fitting hangs 20 cm below the plaster, so on a 2.4 m ceiling the light finishes about 2.2 m above the floor and the blades sit a little higher. The manufacturer's own sheet asks for 2.3 m of clearance under the blades, which a 2.5 m ceiling meets with room to spare; on a 2.4 m ceiling the installing electrician should confirm the spot before fitting.
What size room does it suit?
The manufacturer rates it for 15 to 25 m² — a main bedroom, a study, a medium living room or a kitchen and dining end. One buyer with an 18 m² room reported that speed 1 of 6 was enough, which gives an idea of how much is held in reserve for a hot afternoon.
Can the light be dimmed?
No. The remote steps the light between 3000 K warm, 4000 K natural and 6000 K cool white, but brightness is fixed. The manufacturer lists the fan as not dimmable, and it must not be wired to a wall dimmer.
How does the winter mode work?
The R button on the remote reverses the motor. Running forward in summer the blades push air down as a draught. Reversed in winter they draw air up and push the warm air gathered at ceiling level back down the walls, which spreads the heat around the room without a draught.
What happens when the LED stops working?
The light is a standard 135 mm, 15 W LED module that unclips from the base of the drum, so it is replaced on its own rather than scrapping the fan. There are no exposed globes to change in normal use.
What are the blades made of?
Three ABS blades with a wood-grain finish in a warm oak tone, on a painted iron housing. The manufacturer does not list solid timber, so the blades are described by their finish rather than their material.
How is the fan controlled?
From the remote control in the box: all off, light on and off, forward, reverse, natural wind, a dial of six speeds with fan off in the middle, and a 1, 2 or 4 hour timer. The seller confirms there is no phone app for this fan, and the manufacturer states it must not be run from a wall-mounted speed controller or dimmer. Batteries for the remote are not included.
Does it need an electrician?
Yes. It is a hardwired ceiling fan and must be installed by a licensed electrician. The motor must never be run before all three blades are fitted, and the ceiling fixing has to hold at least 45 kg.
Can it be used outside?
No. The manufacturer does not state an IP rating and the installation manual marks the fan as indoor use only, so it should not go on a verandah, in an open carport or anywhere it can be reached by rain or spray.
How long does delivery take?
Handling time is 1–3 business days and transit time is 7–14 business days, so total delivery time is 8–17 business days. Orders placed after 5pm AEST, or on weekends and public holidays, begin processing the next business day. See the Shipping Policy.
What is the return period, and what condition must items be in?
Returns can be requested within 30 days of delivery. Items must be unused, in their original condition and in the original packaging. There is no restocking fee. See the Return & Refund Policy.
What if an item arrives damaged or defective, and when are refunds issued?
Items that arrive damaged, defective or incorrect should be reported within 7 days of delivery, with photos, for a replacement or a full refund. Approved refunds are issued to the original payment method within 5–10 business days after the return is received and inspected.
Detailed Specifications
Dimensions, materials and light output listed
Selected for Design
Chosen for design, materials and everyday practicality
Australian Business
Based in Mascot, NSW, with prices in AUD
Black November at LumePorch
Buy more than one piece and the discount comes off automatically at checkout, up to 20%. Orders over $400 also come with a free table lamp, and orders over $1,200 come with a free ceiling fan.
One gift per order, on top of the volume discount. Offer ends 30 November.
You may also like
Black November at LumePorch
Up to 20% off, plus a free gift on orders over $400. Free standard shipping Australia-wide. Ends 30 November.