Two-Tier Cone Shade Walnut Tone Wood and Metal Table Lamp
In stock · Ready to ship
Two-Tier Cone Shade Walnut Tone Wood and Metal Table Lamp
Product ID: LP-TBL100
The extra discount comes off automatically in the cart.
Spend more, get the bigger gift.
One gift per order · the highest you unlock, on top of the volume discount.
Dispatched within 1–3 business days.
Free shipping Australia-wide. Dispatched in 1–3 business days, then 7–14 business days in transit.
- Free tracked delivery Australia-wide
- 30-day returns, no restocking fee
- Secure checkout
- Two-tier shade: a 30 cm off-white fabric cone over a smaller inner cone, each edged with a thin orange trim
- 43 cm high on a walnut-tone ash stem and a round metal foot, so it stands no taller than the bedside table or desk it sits on
- One E27 fitting with a 12 W tri-colour LED bulb included, and the Australian plug
The Two-Tier Cone Shade Walnut Tone Wood and Metal Table Lamp is a plug-in table lamp built from two cones: a wide fabric cone edged with a contrast trim, and a smaller inner cone that sits just below it. Both rest on a short metal neck above a slim, tapered stem of ash wood in a walnut tone, on a round electroplated metal foot. It stands about 43 cm high, and the outer shade measures 30 cm across.
The light leaves through the fabric and through the gap between the two cones, so it reads as a wide band of glow rather than one bright point. The manufacturer states a single E27 fitting and supplies a 12 W tri-colour LED bulb as standard, so the lamp works straight out of the box. It runs from an ordinary power point and is ordered with the Australian plug, so no adaptor is needed.
Specifications
| Dimensions | Approx. 43 cm high; shade diameter 30 cm |
| Materials | Electroplated metal, ash wood and a fabric shade, as stated by the manufacturer |
| Finish | Ash stem in a walnut tone; off-white fabric shade with a thin contrast trim. The manufacturer does not name the metal finish; in the manufacturer's photographs it reads as a satin nickel tone |
| Shade | Two-tier cone: a wide outer cone with a smaller inner cone beneath it. The shade is fixed, not tilting |
| Light source | One E27 fitting, as stated by the manufacturer |
| Bulb | A 12 W tri-colour LED bulb is included as standard, as stated by the manufacturer. The three colour settings, and how they are selected, are not stated by the manufacturer |
| Maximum bulb wattage | Not stated by the manufacturer |
| Colour temperature | Not stated by the manufacturer. It depends on the setting of the bulb supplied, or on a replacement E27 bulb |
| Dimmable | Not stated by the manufacturer |
| Control | Not stated by the manufacturer. The cord in the manufacturer's photographs is plain, with no in-line switch on it |
| Power | Mains powered, corded, plugs into a standard power point |
| Voltage | Not stated by the manufacturer. Ordered with the Australian plug and suited to the Australian 230 V supply |
| Cord length | Not stated by the manufacturer |
| IP rating | Not stated by the manufacturer. For indoor use in dry areas |
| Package weight | Approx. 2.5 kg, as stated by the manufacturer |
| Installation | Freestanding, plug-in, no wiring |
| Width | 30 cm |
| Design | Mid-century, Modern |
| Colour family | White, Brown, Silver |
| Number of lights | 1 |
Sold as a single lamp.
What's in the box
- 1 x table lamp with its two-tier cone shade
- 1 x E27 LED bulb, 12 W, tri-colour, as stated by the manufacturer
Installation and Care
Installation
No wiring and no electrician are needed: the lamp plugs into a standard power point and is ordered with the Australian plug. Stand it on a flat, stable surface, check that the supplied E27 bulb is screwed home, plug it in and switch the power point on. Keep the cord clear of walkways.
Care
Switch off at the power point, unplug the lamp and let the bulb cool before cleaning. Dust the fabric shade with a soft, dry brush or cloth, working from the top of the cone outwards, and take care with the trim on the rims. Wipe the ash stem with a dry cloth and the metal foot with a soft cloth, dry or barely damp, keeping water away from the wood, the fabric and the fitting. Keep the lamp away from heat sources and damp areas.
Questions about this light? Contact LumePorch at info@lumeporch.com or +61 450 630 097 (Mon–Fri, 9am–5pm AEST). Every message receives a reply within 24 hours on business days.
Returns and Refunds
- 30-day returns from the day the order is delivered
- Items must be unused, in original condition and in the original packaging
- No restocking fee
- Return shipping is covered by LumePorch for damaged, defective or incorrect items; other returns are shipped back at the customer's cost
- Approved refunds are issued to the original payment method within 5–10 business days after inspection
View the full Return & Refund Policy
Need help? Email info@lumeporch.com
Shipping and Delivery
- Free standard shipping on all orders within Australia (no minimum)
- Handling time: 1–3 business days (Monday–Friday)
- Transit time: 7–14 business days after dispatch
- Total delivery time: 8–17 business days
- Orders placed after 5pm AEST, or on weekends and public holidays, begin processing the next business day
- Tracking details are emailed as soon as the order is dispatched
Delivery estimates are provided as a guide; if an unexpected delay occurs, the customer is notified by email.
Track an order on the Track Your Order page
Need help? Email info@lumeporch.com
A shade in two tiers
A wide, shallow fabric cone sits over a second, smaller cone, each one edged with a thin contrast trim.
Ash wood and metal
A slim, tapered stem of ash wood in a walnut tone stands on a round electroplated metal foot, as stated by the manufacturer.
Bulb included
One E27 fitting, and the manufacturer supplies a 12 W tri-colour LED bulb as standard, so it works out of the box.
A shade in two parts
The wide outer cone is 30 cm across and sits over a second, much smaller cone, each one bound at the rim with a thin contrast trim. Light leaves through the fabric and through the gap between the two cones, so it reads as a wide band of glow rather than one bright point. Below them a short metal tube meets a slim stem of ash wood in a walnut tone, on a round metal foot. The whole lamp is 43 cm high, which keeps it under the height of a standard bedside table or desk.
SIZE & PLACEMENT
How big it is, and where it fits
Size guide- Size
- 43 cm high, with the outer shade 30 cm across — lower than a bedside table or a desk is tall, and a little taller than a wine bottle
- Light
- One E27 fitting. The manufacturer supplies a 12 W tri-colour LED bulb as standard
- Power
- Plug-in and corded, ordered with the Australian plug, which suits the Australian 230 V supply
Where is it going?
Enter the length in centimetres.
Measurements above are the manufacturer's. Send the table or console measurements to info@lumeporch.com and the team will reply with a suggestion.
Better in pairs
The wide cone spreads its light sideways and down, so one lamp lights the surface it stands on and the wall behind it, and a pair covers both ends of a long one. On matching bedside tables that gives each side of the bed its own light to read by; on a sideboard it lights the whole length, where a single lamp leaves the far end dark.
FAQ
Frequently asked questions
Does it come with a bulb?
Yes. The manufacturer states one E27 fitting and supplies a 12 W tri-colour LED bulb as standard. The three colour settings, how they are selected, and the maximum wattage for a replacement bulb are not stated by the manufacturer.
Does the shade tilt?
No. The shade sits level on a short metal neck and the manufacturer states no tilting, swivel or adjustment of any kind. Both cones are fixed in place.
How big is it, really?
43 cm high, with the outer shade 30 cm across. That is lower than a standard bedside table or desk is tall, and a little taller than a 30 cm wine bottle. The packed weight is about 2.5 kg.
Does it come with an Australian plug?
Yes. It is ordered with the Australian plug, so it goes straight into a standard power point and suits the Australian 230 V supply. No adaptor, no wiring and no electrician are needed. The input voltage range is not stated by the manufacturer.
How is it switched, and can it be used outdoors?
How the lamp is switched is not stated by the manufacturer, and the cord in the manufacturer's photographs is plain, with no in-line switch on it. Whether it can be dimmed is not stated either. The manufacturer does not state an IP rating, so the lamp is for indoor use in dry areas only, away from rain, pools and damp rooms.
How much does shipping cost, and where does LumePorch ship?
Standard shipping is free on all orders, with no minimum order value and no additional shipping fees at checkout. Orders ship to addresses within Australia only, including every state and territory.
How long does delivery take?
Handling time is 1–3 business days and transit time is 7–14 business days, so total delivery time is 8–17 business days. Orders placed after 5pm AEST, or on weekends and public holidays, begin processing the next business day. See the Shipping Policy.
How is an order tracked, and what happens if a parcel goes missing?
Every order ships with tracking, and the tracking number is emailed as soon as the order is dispatched. If tracking has not updated or the order has not arrived within the estimated window, email info@lumeporch.com: the team investigates with the carrier and sends a replacement or refund where the parcel is confirmed lost. Details are on the Track Your Order page.
What is the return period, and what condition must items be in?
Returns can be requested within 30 days of delivery. Items must be unused, in their original condition and in the original packaging. There is no restocking fee. See the Return & Refund Policy.
How is a return started, and who pays for return shipping?
Email info@lumeporch.com with the order number and the reason for the return. The team replies within 24 hours on business days with the return address and instructions. Return shipping is paid by the customer, except when an item arrives damaged, defective or incorrect, in which case the return is covered by LumePorch.
What if an item arrives damaged or defective, and when are refunds issued?
Items that arrive damaged, defective or incorrect should be reported within 7 days of delivery, with photos, for a replacement or a full refund. Approved refunds are issued to the original payment method within 5–10 business days after the return is received and inspected.
How can LumePorch be contacted?
Email info@lumeporch.com or call +61 450 630 097. Customer service hours are Monday to Friday, 9am–5pm AEST, and every message receives a reply within 24 hours on business days.
Detailed Specifications
Dimensions, materials and light output listed
Selected for Design
Chosen for design, materials and everyday practicality
Australian Business
Based in Mascot, NSW, with prices in AUD
Black November at LumePorch
Buy more than one piece and the discount comes off automatically at checkout, up to 20%. Orders over $400 also come with a free table lamp, and orders over $1,200 come with a free ceiling fan.
One gift per order, on top of the volume discount. Offer ends 30 November.
You may also like
Black November at LumePorch
Up to 20% off, plus a free gift on orders over $400. Free standard shipping Australia-wide. Ends 30 November.