In stock · Ready to ship
Wavy Ribbed Resin Half Cylinder Up Down Wall Light
Product ID: LP-IWL242 · SKU: LP-IWL242-GN-22
Buy a pair & save
Mix and match wall, pendant, table and outdoor lights. The discount is applied in the cart.
Dispatched within 1–3 business days.
Free shipping Australia-wide. Dispatched in 1–3 business days, then 7–14 business days in transit.
- Free tracked delivery Australia-wide
- 30-day returns, no restocking fee
- Secure checkout
- Wavy ribbed surface
- Up and down light: open top and bottom wash the wall above and below the fitting
- Moulded resin body
The Wavy Ribbed Resin Half Cylinder Up Down Wall Light is an indoor wall sconce shaped as a vertical half cylinder of moulded resin, covered in uneven, wavy vertical ribs and open at the top and bottom. Two E27 lamps inside send light up and down the wall, while the solid coloured body hides the lamps from the front.
At 15 cm wide and 26 cm high per the manufacturer's size diagram, it sits flat against the wall and comes in green, yellow, orange or grey for hallways, stairs and feature walls.
Specifications
| Dimensions | 15 cm wide × 26 cm high, per the manufacturer's size diagram (the depth is not stated) |
| Materials | Moulded resin, metal |
| Colours | Green, yellow, orange or grey |
| Light direction | Up and down |
| Light source | 2 × E27 screw base. The lamps are not included |
| Maximum wattage | Not stated by the manufacturer. |
| Dimmable | Not stated by the manufacturer. Dimming depends on the lamps and circuit used |
| IP rating | Not stated by the manufacturer. For indoor use in dry areas. |
| Input voltage | AC 220–240V (compatible with Australian 230V mains) |
| Weight | Not stated by the manufacturer. |
| Installation | Hardwired wall mount |
Sold as a single light.
What's in the box
- 1 × resin wall light in the chosen colour
- Mounting hardware as supplied by the manufacturer (the contents of the box are not itemised in the product information)
- No lamps: two E27 LED lamps are purchased separately
Installation and Care
Installation
This wall light is hardwired. In Australia, hardwired light fittings must be installed by a licensed electrician. The flat back sits against plasterboard or masonry; fit the lamps before the resin body is closed onto its wall fitting, and use LED lamps, which run cooler inside the enclosed shade.
Care
Switch the power off and let the lamps cool before cleaning. Dust the ribs with a soft dry brush or microfibre cloth, and wipe marks with a barely damp cloth. Avoid solvents and abrasive cleaners on the coloured finish.
Questions about this light? Contact LumePorch at info@lumeporch.com or +61 450 630 097 (Mon–Fri, 9am–5pm AEST). Every message receives a reply within 24 hours on business days.
Returns and Refunds
- 30-day returns from the day the order is delivered
- Items must be unused, in original condition and in the original packaging
- No restocking fee
- Return shipping is covered by LumePorch for damaged, defective or incorrect items; other returns are shipped back at the customer's cost
- Approved refunds are issued to the original payment method within 5–10 business days after inspection
View the full Return & Refund Policy
Need help? Email info@lumeporch.com
Shipping and Delivery
- Free standard shipping on all orders within Australia (no minimum)
- Handling time: 1–3 business days (Monday–Friday)
- Transit time: 7–14 business days after dispatch
- Total delivery time: 8–17 business days
- Orders placed after 5pm AEST, or on weekends and public holidays, begin processing the next business day
- Tracking details are emailed as soon as the order is dispatched
Delivery estimates are provided as a guide; if an unexpected delay occurs, the customer is notified by email.
Track an order on the Track Your Order page
Need help? Email info@lumeporch.com
Wavy ribbed surface
Irregular vertical ribs give the half cylinder a hand-formed, organic texture.
Up and down light
Open top and bottom wash the wall above and below the fitting.
Moulded resin body
Resin body on a metal wall fitting, with a flat back that sits against the wall.
Soft light on the wall
The Wavy Ribbed Resin Half Cylinder Up Down Wall Light is an indoor wall sconce shaped as a vertical half cylinder of moulded resin, covered in uneven, wavy vertical ribs and open at the top and bottom. Two E27 lamps inside send light up and down the wall, while the solid coloured body hides the lamps from the front.
SIZE & PLACEMENT
Where it works, and how high
- Size
- 15 cm wide × 26 cm high, per the manufacturer's size diagram (the depth is not stated)
- Light
- 2 × E27 screw base. The lamps are not included
- Where
- Indoor dry areas
Where is it going?
Enter the length to see how many fittings suit.
Measurements are general guidance from Australian lighting sizing guides. Send the wall or hallway measurements to info@lumeporch.com and the team will reply with a suggested height and spacing.
Where it works best
Hallways, stair walls and landings, living room feature walls, entries and either side of a bed, in dry indoor areas. A pair in the same or contrasting colours frames a doorway, mirror or artwork.
FAQ
Frequently asked questions
How big is the Wavy Ribbed Resin Half Cylinder Up Down Wall Light?
It is 15 cm wide and 26 cm high, per the manufacturer's size diagram. The depth from the wall is not stated.
Which way does the light shine?
Up and down. The half cylinder is open at the top and bottom and solid at the front, so light washes the wall above and below it.
What lamps does it take?
Two E27 screw-base lamps, which are not included. LED lamps are the suitable choice.
How much does shipping cost, and where does LumePorch ship?
Standard shipping is free on all orders, with no minimum order value and no additional shipping fees at checkout. Orders ship to addresses within Australia only, including every state and territory.
How long does delivery take?
Handling time is 1–3 business days and transit time is 7–14 business days, so total delivery time is 8–17 business days. Orders placed after 5pm AEST, or on weekends and public holidays, begin processing the next business day. See the Shipping Policy.
How is an order tracked, and what happens if a parcel goes missing?
Every order ships with tracking, and the tracking number is emailed as soon as the order is dispatched. If tracking has not updated or the order has not arrived within the estimated window, email info@lumeporch.com: the team investigates with the carrier and sends a replacement or refund where the parcel is confirmed lost. Details are on the Track Your Order page.
What is the return period, and what condition must items be in?
Returns can be requested within 30 days of delivery. Items must be unused, in their original condition and in the original packaging. There is no restocking fee. See the Return & Refund Policy.
How is a return started, and who pays for return shipping?
Email info@lumeporch.com with the order number and the reason for the return. The team replies within 24 hours on business days with the return address and instructions. Return shipping is paid by the customer, except when an item arrives damaged, defective or incorrect, in which case the return is covered by LumePorch.
What if an item arrives damaged or defective, and when are refunds issued?
Items that arrive damaged, defective or incorrect should be reported within 7 days of delivery, with photos, for a replacement or a full refund. Approved refunds are issued to the original payment method within 5–10 business days after the return is received and inspected.
How can LumePorch be contacted?
Email info@lumeporch.com or call +61 450 630 097. Customer service hours are Monday to Friday, 9am–5pm AEST, and every message receives a reply within 24 hours on business days.
Detailed Specifications
Dimensions, materials and light output listed
Selected for Design
Chosen for design, materials and everyday practicality
Australian Business
Based in Mascot, NSW, with prices in AUD
Modern lighting, clearly described
LumePorch makes well-designed lighting simple to buy in Australia. Every product page lists the details worth checking before ordering, such as dimensions, materials, finish and light output, with prices in Australian Dollars and free standard shipping.